The S5730-SI series switches (S5730-SI for short) are next-generation standard gigabit Layer 3 Ethernet switches. They can be used as an access or aggregation switch on a campus network or as an access switch in a data center.

The S5730-SI series switc

Category: Switch

 The S5730-SI series switches (S5730-SI for short) are next-generation standard gigabit Layer 3 Ethernet switches that provide flexible full gigabit access and cost-effective fixed GE ports and 10 GE uplink ports, meanwhile can provide 40 GE uplink ports with an interface card. The S5730-SI was developed based on next-generation high-performing hardware and the Huawei Versatile Routing Platform (VRP). The S5730-SI supports simplified Operations and Maintenance (O&M), intelligent Stack (iStack), flexible Ethernet networking. It also provides enhanced Layer 3 features and mature IPv6 features. The S5730-SI can be used in various scenarios. For example, it can be used as an access or aggregation switch on a campus network or as an access switch in a data center.

 

Item S5730-48C-SI-AC S5730-48C-PWR-SI-AC S5730-68C-SI-AC S5730-68C-PWR-SI-AC

S5730-68C-PWR-SI
Switching Capacity 680 Gbit/s
Forwarding Performance 240 Mpps 240 Mpps 240 Mpps 240 Mpps
Fixed Ports 24 x 10/100/1,000 Base-T, 8 x 10 Gigabit SFP+ 24 x 10/100/1,000 Base-T, 8 x 10 Gigabit SFP+ 48 x 10/100/1,000 Base-T, 4 x 10 Gigabit SFP+ 48 x 10/100/1,000 Base-T, 4 x 10 Gigabit SFP+
Extended Slot One extended slot that supports an interface card: 4 x 40 GE QSFP+ interface card
MAC Address Table IEEE 802.1d compliance 

32K

MAC address learning and aging

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses

VLAN Features 4K VLANs 

Guest VLAN and voice VLAN

GVRP

MUX VLAN

VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

1:1 and N:1 VLAN mapping

IPv4 Routing Static route, RIPv1/v2, RIPng, OSPF, OSPFv3, ECMP, IS-IS, IS-ISv6, BGP, BGP4+, VRRP, and VRRP6
IPv6 Features Neighbor Discovery (ND) 

Path MTU (PMTU)

IPv6 ping, IPv6 tracert, and IPv6 Telnet

6to4 tunnel, ISATAP tunnel, and manually configured tunnel

ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type

Super Virtual Fabric (SVF) Plug-and-play SVF client 

Automatic software and patch loading to clients

One-click and automatic delivery of service configurations

Independent client running